Key in your user name and password on the login page, and press Enter.
Make sure you use one of the supported browsers, which are: Mozilla Firefox 40+, Google Chrome 38+, Opera 10+, Internet Explorer 9+. See System Requirements and Optimization.
You have entered the main interface of the tracking system. On the left, there is the work area. Here you work with panels like Monitoring, Tracks, Geofences, Jobs, Notifications and so on. These panels you choose in the Main menu above the work area.
On the right, there is usually the map.
WBC Fleet's interface is developed to be user friendly that is why we can choose the panels of main menu we need to work with. They are: Monitoring, Messages, Reports, Geofences, Notifications, Units (Main menu customizer helps us in this task).
Dragging the map with the left mouse button and zooming it with the mouse scroll, move to the location (city or town) which will be the basic for you in the tracking process.
In order to choose user parameters click on the username in the right corner of the top panel and press the User settings button in the dropdown menu. Afterwards, follow the steps:
Make sure you have selected the above mentioned settings properly, because they could influence the correctness of data presented in reports, messages, tooltips, jobs, routes, and elsewhere throughout the system. Indicate 'City' setting in the same dialog. It is necessary for the map to be scaled on the chosen city upon the following entries to the tracking system.
Preparatory work is finished. Now let us create a tracking unit.
Open the Units panel in the work area and press the New button.
The dialog with multiple unit settings will be displayed. Give a name to the unit, indicate device type (click inside the field to see the list of available devices), enter unique ID (IMEI or serial number) and the phone number of the SIM card inserted into the device.
The Icon tab of the dialog provides an opportunity to choose the most appropriate image to display the unit on the map.
On the Advanced tab specify Speed limit, km/h. This setting is used to generate reports on speedings.
In the end press OK button. The newly created unit will appear in the list. Click on a unit name to locate it on the map.
It will also appear in the monitoring panel.
a) Log: After creating a unit, data from it starts coming in the system as long as the unit is configured correctly. Each incoming message appears in the log. To see the log, open it pressing the button in the bottom right-hand corner of the program.
Along with the messages coming from tracking units, the log also shows current actions and operations such as creation and modification of geofences, notifications, unit properties, etc.
b) Unit info tip: Hover the mouse pointer over the unit in the Monitoring panel or on the map to see the latest data in a tooltip: last message time, location (address or coordinates), speed, etc.
Geofences are to be created in places of interest, which should get under control. For this, go to the Geofences panel and press the New button.
The simplest and quickest geofence type to create is circle with specified radius. Enter name for the geofence and select the type Circle. Then double-click on the map in the place of supposed geofence. Alter the radius if necessary and press Save.
In a similar way, create as many geofences as necessary.
If you need a geofence of a more sophisticated form, choose type Polygon or Line. However, in this case a greater number of points is required to specify geofence's borders.
Now we can create a notification about a unit entering a geofence. Go to the Notifications panel and press the Create Notification button.
Moving through the dialog with the help of the Next button, set the following parameters for the notification:
When the notification triggers, it will appear in the top right corner of the program.
To switch to the Reports, click on the corresponding panel in the menu above the work area.
First of all, we need at least one report template to generate a report according to parameters set there. We are going to create a report template containing two tables (visits to geofences and speeding) and a chart.
To create a report template, go to the Reports panel and press the New button. At the top of the template properties dialog, you see two important buttons — Add Table and Add Chart.
Press the Add Table button and set table type to Geofences. On the left, tick the columns to be displayed in the resulting report. On the right, choose geofence(s). When finished, press OK. The table will be added to the report.
Then add the second table — press Add Table again and choose a table of Speedings type. For this table we have set the parameter Speed limit in unit properties (Advanced tab). In additional parameters indicate that a speeding should last at least one minute (Min duration parameter). Press OK. The table will be added to the report.
Then press the Add Chart button and select the necessary chart type (for example, mileage in trips). Note that for many charts to be generated the appropriate sensors are required. Press OK.
This is how our report template looks like after we have added two tables and a chart. Report contents are displayed on the left. Now give a name to the report and save it.
To obtain a report, set parameters in the work area: select report template, unit, reported interval, and press Execute.
Generated report will appear on the right. On the left, you see tabs to navigate between report sections (tables and charts). Besides, the report can be exported to various formats or printed (for this, use the proper buttons — Export to File and Print).